Plasticsbuy.com - B2B marketplace
Plasticsbuy.com - B2B marketplace. Business offers Plastics and chemicals, Chemicals, Machines, Semi-finished products, Plastics & Additives, Products, Services, Other.
-
Sell:Desiccant Dri-Pack
DRI-PACK has been foreseen as moisture sinks for use in industrial packaging units such as cartons, containers, boxes, plastic containers, etc. The standard storage conditions can be widely used as protection of individual articles of clothing types, footwear, leather goods, electronics, computers, paper, etc.
ScanPack S.J. / Poland -
Sell:Termoformierka ILLIG RDKP 54 C 1986.
Termofrmierka ILLIG RDKP 54 C. The three stations for packaging cups, containers, tależe, flower pots with foil PS, PE, PET, PP, etc. It has top and bottom heater, control Indramat. MAX.obszar forming 540x400 mm Max. height / depth of formation of 100 mm Max film width 560 mm Max. closing force of 12000 daN capacity vacuum pump 70 m3 / h Takt Cycles 25 min-1 CA Druckluftverbrauch Its Requirements 195 / power stroke of the upper heater Power 12.8 KW 8.4 KW heaters lower
PPHU LEOPLASTYK / Poland -
Buy:
We are looking for the partners that could deliver the following PVC materials
We are looking for the partners that could deliver the following PVC materials: 1)PVC- off grade K – 68-70 Particle Size: 350 microns 2) Dryblend Particle Size: 400 microns Hardness: 78-80ShA density: 1,34g/cm3 Colour: black 3) Pulver Particle Size: 400 microns Hardness: 85 +/- 10 ShA Density: 1,35 +/- 0,1 g/cm3 4)Regrinds Hardness: 85 +/- 10 ShA Density: 1,35 +/- 0,1 g/cm3 Preferable black 5)Regranulate Hardness: 78-80 ShA Density: 1.34 +/- 0,04 g/cm3 Colour Black In case of interests please contact Mr.Piotr Mazurek tel.+48 604159161 mail: Mazurek@ergis.eu
Ergis-Eurofilms S.A. / Poland -
-
Sell:Used stainless steel 53000 litres horizontal jacketed tank mounted on six legs
Stock number: UG4707 Used stainless steel 53000 litres horizontal jacketed tank mounted on six legs. Internal layer made of stainless steel h18ni with thickness 12mm, insulation layer is filled under vacuum with pearlite. Outside jacket made is made of carbon steel with thickness 8mm. Unit has dimenssions 3200 mm diameter by 10000 mm long. Tank is suitable for 3.8 bar pressure and vacuum. Unit had been tested on 5 bar pressure test and went it ok.
Perry Machinery Poland / Poland -
Sell:
ABS filler masterbatch
ABS8000 Features 1.No change for the related processing technology and equipment 2.good dispersion and compatibility with ABS 3.Saving cost and no damage to the machines 4.Certified by SGS Guidelines 1.Addition rate: 20%~40%(according to customer reuqirements); 2.Simply mix with plastic raw materials.
dongguan yongxuan plastic materials co.,ltd / China -
Sell:Used stainless steel horizontal storage tank with total volume 26000 l
Stock number: U2061-5 Used stainless steel (321) horizontal storage tank with total volume 26000 l by SPOMASZ ŁÓDZ (Poland). Diameter 2840 mm x 4100 mm length of straight side of wall. Tank is mounted on two saddles. Manway with diamteter 400 mm and lid. Also tank has a level indicator. Shipping dimenssions: width 2900 mm x height 3250 mm x length 4700 mm. Total weight 2356 kg.
Perry Machinery Poland / Poland -
Sell:Used glass lined kettle by I.M.C. TECHNOGLASS (Italy) with volume 3510 l
Stock number: U2059-5 Description: Used glass lined kettle by I.M.C. TECHNOGLASS (Italy) with volume 3510 l. Working pressure from -1 to 6 bar, working temperature in range -25C to 200C. Kettle has a jacket with volume 373 l, designed for work on 6 bar pressure and at 200 C. Kettle has anchor agitator working with rotation speed 45 rpm, driven by planetary gearbox and electric motor with power 5.5 kW. Kettle has thermo-coupling and discharge valve.
Perry Machinery Poland / Poland -
Sell:Angle Corrugated KRAFT
Pressed paper Kraft welded - made in welding technology will consist of several layers of laminated paper and reinforced Kraft paper. Kraft angles are welded to the hot and molded under high pressure, and the outer layer is made of Kraft paper in brown. Are resistant to moisture, low temperatures. Very effectively stiffen and stabilize loads on pallets.
ScanPack S.J. / Poland -
Sell:
Testosterone Undecanoate
Synonyms:Andriol;(17beta)-3-oxoandrost-4-en-17-yl undecanoate; 3-oxoandrost-4-en-17-yl undecanoate Molecular Formula:C30H48O3 Molecular Weight:456.7003 CAS Registry Number:5949-44-0 EINECS:227-712-6 Density:1.037g/cm3 Refractive index:1.522 Assay:98% min. Appearance:White crystalline powder. Usage:Pharmaceutical material, Steroid hormone, Anabolin. Packing:1kg net/foil bag or tin. Delivery:Express courier. The min. order is 10 grams.
Hubei Yuancheng Pharmaceutical Co.,Ltd / China -
Sell:
Rebuilded disc centrifuge, purifier design, by ALFA LAVAL
Stock number: UG5905 Rebuilded disc centrifuge, purifier design, by ALFA LAVAL type BRPX 313 XGD-14. Includes set of tools, manual and frequency converter. Machine is driven by electric motor 60 Hz, 380 V. Completely recondition.
Perry Machinery Poland / Poland -
Sell:Used filter dryer nutsche type by COMBER
Stock numner: U2059-3 Used filter dryer nutsche type by COMBER (Italy) type PF300. Volume of chamber 300 l. Working pressure range -1 to 4 bar at temperature 150 C. Jacket rated 4 bar and temperature 151 C. Site bottom discharge. Filtration surface 0.6 m2. Includes control panel. Vacuum system and heat exchangers for heating and cooling machine during the work. Agitator works with rotation speed 25 rpm and is driven by electric motor with power 4 kW. Uprising and lowering of agitator is driven by electric motor with power 0.25 kW. Filtration deck is driven by another electric motor with power 0.75 kW.
Perry Machinery Poland / Poland -
Sell:Adhesive tape - 200m/rol - Economics
TAPE BONUS-SYROM is the only true example of reducing costs of material and packaging waste and emissions into the environment. 50mm/200m BONUS TAPE - is a patented adhesive tape SYROM 90, which allows you to reduce the storage space occupied by more than 2 / 3! A small bush, new, custom coil, as much as 200 meters will save you time, which until now has dealt frequently change the rollers used on the new one. But not only is a great advantage of this tape. It is produced with natural rubber adhesive which makes it resistant to weather conditions (both positive and negative). Normally in brown, white and transparent. One tape roping BONUS for example, closes permanently sealed with cardboard and other surfaces in the glue does not leave.
ScanPack S.J. / Poland -
Sell:Regranulate PP black
Buy regranulate black polypropylene of good quality.
F.P.U.H. Błachut / Afghanistan -
Sell:Used filterpress manufactured by TEFCA
Stock number: UG5904 Used filterpress manufactured by TEFCA model HPLE 800/15. Press has 45 chamber plates designed in pp with dimensions 800 mm x 800 mm. What gives filtration surface 44.1 m2. Press is equipped with feeding pump, double screw conveyer mounted under press and hydraulic clousing device.
Perry Machinery Poland / Poland -
Sell:Secondary granule of LDPE, HDPE, LLDPE, PP, HIPS.
Dear ladies and gentlemen! An enterprise on processing of polymers offers a secondary granule: - Polyethylene of low-density(LDPE) - Polyethylene of high-density(НDPE) - Linear polyethylene of low-density( LLDPE) - PS (HIPS) -Polypropylene( РР). - pipe granule of HDPE + LDPE We hope on a fruitful and mutually beneficial collaboration. We work on Ukraine,to the countries of near and distant Foreignness
ЧП Корбачков М.И / Ukraine -
Sell:Used vertical glass lined receiver by De Dietrich
Stock number: U2059-30 Used vertical glass lined receiver by De Dietrich (France) with volume 500 l. Working pressure -1 to 6 bar. Working temperature from -25 C to 200 C, Mounted on 4 lugs.
Perry Machinery Poland / Poland -
Sell:3E Pro - Multi-Purpose Detergent - Concentrate
3E Pro is a multi-purpose detergent. In its transport and storage form 3E Pro is a highly concentrated powder that must be diluted with water to appropriate concentrations before use, in accordance with the attached instructions. 3E Pro can be diluted between 20 and 1000 times depending on Your needs. It is and alkaline detergent with Ph=12. 3E Pro is suitable for cleaning and washing all kinds of water-resistant surfaces and materials. It is very good for handling stains from motor oil, diesel oil, grease, soot, vegetable oils, soft drinks, fruits, blood, pus, etc. At the same time 3E Pro is especially gentle to the materials and surface on which it is applied. 3E Pro doesn’t damage the paint and varnish, nor does it bleach fabrics. It doesn’t damage rubber and plastic seals and components. More info at: http://www.3epro.pl/en/products/3e_pro
Pro Performance / Poland -
Sell:Used glass lined kettle De Dietrich
Stock number: U2059-8 Used glass lined kettle De Dietrich (France) with volume 332 l. Working pressure from -1 to 6 bar, working temperature in range -25 C to 200 C. Kettle has a jacket with volume 75 l, designed for work on 6 bar pressure and temperature up to 200 C. Kettle has anchor agitator working with rotation speed 77 rpm, driven by planetary gearbox and electric motor with power 1.1 kW. Kettle has thermo-coupling and discharge valve.
Perry Machinery Poland / Poland -
Sell:Buy grist PP black, gray
I have to sell the milling of PP black (Bumper Transition.) Approximately 20 tons. Grinding gray 10ton
F.P.U.H. Błachut / Afghanistan -
Sell:Desiccant - Dri-Pack
DRI-PACK has been foreseen as moisture sinks for use in industrial packaging units such as cartons, containers, boxes, plastic containers, etc. The standard storage conditions can be widely used as protection of individual articles of clothing types, footwear, leather goods, electronics, computers, paper, etc.
ScanPack S.J. / Poland -
Sell:dry strength agent
Dry strength agent ⅠProduct introduction DS series of dry strength agent can be widely used in papermaking of packaging paper, household paper, newsprint, cultural paper and other paper. It can effectively improve the paper’s folding strength, bursting strength, stiffness, ring crush strength and so on. On papermaking system with much anionic impurities or high electrolyte concentration, the effect is particularly evident. At the same time it has retention effect to flake fine and filler can reduce the loss of fibers and linting and dusting phenomenon. It can produce enough dry strength and allows the use of inexprensive fiber or a higher proportion of secondhand fiber. Ⅱ Physical properties Appearance: colorless or light yellow viscous liquid Charge types: amphoteric ion (cation) Solid content: 15% ± 1%, 20% ± 1% Viscosity: 7000 ± 3000 mpa.s (25 ℃) PH value: 3.5 ± 1 Water solubility: soluble in cold water Guaranteed quality period: 3 months (5 ℃ -35 ℃, avoid direct sunlight) Ⅲ the main features 1. Improve the tensile strength, stiffness, ring crush strength, bursting strength, folding endurance and other physical index. 2. Improve retention rate of the fine fiber and filler and rainage performance. IV Direction 1. First, adding 2 / 3 of the water to the container. Under the mixing state slowly added to the product (product viscosity is high, do not pour off at one time).When the strength agent is completely dissolved and diluted, the surplus water can be added. According to work field conditions, more than 10 times of dilution is recommended. 2. Adding point: on the pump inlet or pressure screen entrance. 3. Adding volume: 8-15 kg solution per ton of paper, or according to production. V package, transportation and storage 1. The product is suitable for indoor storage, not near a heat source, direct sunlight or freezing. 2. The period of storage is at most three months. It can be regarded as non-dangerous goods in transportation and storage. 3. Plastic barrels package, Package specifications should depend on the conditions of the customer’s field.
Hubei Jiayun Chemical Technology Co.,Ltd / China -
Sell:wet strength agent
PPE wet strength agent ⅠIntroduction PPE epoxy polyester wet strength agent for chemical name of polyamide polyamine epichlorohydrin resin is internationally referred to as PPE or PAE. The product is water-soluble cationic thermosetting resin, which is superior to conventional urea aldehyde resin and melamine-formaldehyde resin. PPE resin can not only improve the paper wet and dry strength, but also improve fines and filler retention, and promote the AKD sizing retention and ripening. Thus it’s suitable neutral or slightly alkaline conditions of papermaking. It can be widely used in household paper, bond paper, banknote paper, fruit bag paper, offset paper, wrapping paper, newsprint paper，decorative paper and other paper with requirements of wet strength. ⅡKey Indicators Appearance:Light yellow viscous liquid Solid content: 12%±0.5% Viscosity: 20 - 90mpa.s (30 ℃) P H value: 3.5 - 6.5 Ⅲ Dosage and usage 1. According to the paper and wet or dry ratio requirements, the dosage of per ton paper is about 5 – 50 kg. The slurry PH value in the 6 - 8 is the best result in use.. 2. Before usage, the product can be diluted about 10 times. If conditions permit, the PH value of the solution adjusted with NaOH solution to 7 – 8 that is appropriate. 3. The adding point is generally pulp tank. Do not add with anionic chemicals simultaneously. Ⅳ package, transportation and storage 1.Dry strengthen agent for high polymer, is suitable for indoor storage, not near a heat source or sunlight exposure.And it could not be stored for a long time after diluted with water. 2. Containers should be sealed when out of use to prevent harmful bacterial contamination. It can be stored for at most 6 months under the Room Temperature. And it can be regarded as non-dangerous goods in transportation and storage. 3.The weight of per package is 200 or 1000 kg plastic barrel or based on the customers’ requirements.
Hubei Jiayun Chemical Technology Co.,Ltd / China -
Sell:AKD sizing agent
Neutral polyester AKD sizing agent ⅠProduct performance Neutral polyester AKD sizing agent is one of newly-developed products in our company for the purpose of avoiding defects such as slow ripening, easy to be under machine moisture regain, high cost, ect. Common AKD emulsion using starch as emulsifier, which cause low retention rate, large dosage, slow ripening. Neutral polyester sizing agent adopts a new type of polymer emulsifier that our company developed independently which takes the petroleum resin as main raw material, and is supplemented by other cationic surfactant,. The emulsifier is polymer, high cationic charge density and thus the emulsification has highly efficiency, uniform dispersion, and small particle size. The manufactured AKD sizing agent ripens fast with high efficiency and the dosage can be reduced more than 10% compared with ordinary AKD products. Ⅱ The Main Technical Indicators 1. Appearance: white emulsion 2. PH value: 3-5 3. Solid content: 15% ± 1%，25% ± 2% 4. Iconicity: cationic 5. storage period: 3 months (5-30 ℃) ⅢApplicable scope 1. High content of product is suitable for surface sizin, may be wholly or partly replace internal sizing agent.It has excellent water resistance effect. 2. Low content of product is suitable for internal sizing.It couod use calcium carbonate as the filler. Per ton absolute dry pulp adds 0.25 kg of polyacrylamide and the molecular is 6.0 million. The results will be better. Ⅳ Attention 1. PH value of the forward mesh headbox is controlled in 6.8 ~ 8.5. If less than 6.8, adding alkali to adjust it. 2, The paper factory should select the best ratio, adding locations and adding way according to the specific situation. 3. Make sure that at least one of the paper machine’s drying cylinders temperature do not lower than 95 ℃. 4. The equipment and pipeline should be thoroughly cleaned by change acidic papermaking into mediate alkaline papermaking. Ⅴ Packaging and storage Pack it with 200 kg or 1000 kg plastic barrels, sealed and stored at room temperature, stay indoor.
Hubei Jiayun Chemical Technology Co.,Ltd / China -
Sell:surface sizing agent
Surface sizing agent series ⅠPhysical property 1.Product type:styrene-acrylate high polymer 2.Physical appearance:light gray with blue latex 3.Dynamic viscocity:≤50mPa.s 4.Solid content:28%± 2% 5.PH value:2.5-5.5 6.Ionicity:A30(Cation);B30(Anion) 7.Storage periond:3 Month(5-35℃) ⅡProduct feature 1. It can completely or partly replace interinal sizing agent,clean paper making environment,reduce the production cost. 2. It can greatly reduce the paper powder production,improve the printing adaptability and surface strength. 3. Excellent mechanical stability.It can be used in a variety of different types of sizing machine. 4. A30 and B30 can both be applied to surface sizing.The dosage balance the imported product. It’s cost-effective. 5. B30 can blend with whitening agent for high whiteness cultural paper surface sizing and does Not reduce the whiteness of the paper. Ⅲ Applicable scope High strength corrugated paper,cardboard paper,cultural paper,coated laundry board,white cardboard,copper plate paper and so on. Ⅳ Usage and attention 1. Gelatinization of starch is diluted to 8%-10%.Compared to starch,add 3%-5% of Aluminum sulfate,3%-5% of surface sizing agent solution.If not used with starch,the dosage compared to coating liquid is 0.5%-1.5% (dry solid content) 2. It can be added to the starch liquid sizing pump inlet by metering pump.In the sizing tank,the agent can play better sizing effect at the temerature of 60-65℃. 3. In the sizing process,it should be that at least a dryer temperature is above 95℃. The paper roll have 100% degree of sizing after completed. 4. Paper moisture will affect its adsorption to starch solution.Generally,before into the surface sizing machine,the paper moisture controlled in 6.0%-8.54% is more appropriate. 5. To avoid sharp dry,or affect the sizing effect. Ⅴ Package and storage Pack it with 200 kg or 1000 kg plastic barrels, sealed and stored at room temperature, stay indoor.
Hubei Jiayun Chemical Technology Co.,Ltd / China -
Sell:surface sizing agent
Surface sizing agent series ⅠPhysical property 1.Product type:styrene-acrylate high polymer 2.Physical appearance:light gray with blue latex 3.Dynamic viscocity:≤50mPa.s 4.Solid content:28%± 2% 5.PH value:2.5-5.5 6.Ionicity:A30(Cation);B30(Anion) 7.Storage periond:3 Month(5-35℃) ⅡProduct feature 1. It can completely or partly replace interinal sizing agent,clean paper making environment,reduce the production cost. 2. It can greatly reduce the paper powder production,improve the printing adaptability and surface strength. 3. Excellent mechanical stability.It can be used in a variety of different types of sizing machine. 4. A30 and B30 can both be applied to surface sizing.The dosage balance the imported product. It’s cost-effective. 5. B30 can blend with whitening agent for high whiteness cultural paper surface sizing and does Not reduce the whiteness of the paper. Ⅲ Applicable scope High strength corrugated paper,cardboard paper,cultural paper,coated laundry board,white cardboard,copper plate paper and so on. Ⅳ Usage and attention 1. Gelatinization of starch is diluted to 8%-10%.Compared to starch,add 3%-5% of Aluminum sulfate,3%-5% of surface sizing agent solution.If not used with starch,the dosage compared to coating liquid is 0.5%-1.5% (dry solid content) 2. It can be added to the starch liquid sizing pump inlet by metering pump.In the sizing tank,the agent can play better sizing effect at the temerature of 60-65℃. 3. In the sizing process,it should be that at least a dryer temperature is above 95℃. The paper roll have 100% degree of sizing after completed. 4. Paper moisture will affect its adsorption to starch solution.Generally,before into the surface sizing machine,the paper moisture controlled in 6.0%-8.54% is more appropriate. 5. To avoid sharp dry,or affect the sizing effect. Ⅴ Package and storage Pack it with 200 kg or 1000 kg plastic barrels, sealed and stored at room temperature, stay indoor.
Hubei Jiayun Chemical Technology Co.,Ltd / China -
Sell:comfortable cow rubber bed mat
Product Introduction: Comfortable type of rubber cow mattresses is a new type of mattresses which adopts a unique design and is very suitable for cows’ living habits of lying in bed for resting and ruminating. with spongy cushion will make cows more comfortable in bedding. Product Features: The outer surface is covered with small vine and easy to wash. In the middle, 3-7cm thick special –designed spongy layer (shown in sort of “Spongy Layer”) is very soft and comfortable. In order to avoid the bacterial growth in the spongy layer, a layer of strong waterproofing membrane is specially covered on the surface of spongy layer. Due to the unique design concept, the product receives great kindness of the farm managers. According to the long-term experimental statistics, the cow bedding rate of this type of mattresses reaches 95 percent, higher than that ordinary mattresses. As far as scientific calculation, the milk yield increases 6.2 percent after using this type of cow mattresses.
Qingdao Haiqin Rubber CO.,LTD / China -
Sell:comfortable rubber mat
Product Introduction: Comfortable type of rubber cow mattresses is a new type of mattresses which adopts a unique design and is very suitable for cows’ living habits of lying in bed for resting and ruminating. With spongy cushion will make cows more comfortable. Product Features: The outer surface is covered with small vine and easy to wash. In the middle, 3-7cm thick special –designed spongy layer (shown in sort of “Spongy Layer”) is very soft and comfortable. In order to avoid the bacterial growth in the spongy layer, a layer of strong waterproofing membrane is specially covered on the surface of spongy layer. Due to the unique design concept, the product receives great kindness of the farm managers. According to the long-term experimental statistics, the cow bedding rate of this type of mattresses reaches 95 percent, higher than that ordinary mattresses. As far as scientific calculation, the milk yield increases 6.2 percent after using this type of cow mattresses.
Qingdao Haiqin Rubber CO.,LTD / China -
Sell:comfortable rubber mat
Product Introduction: Comfortable type of rubber cow mattresses is a new type of mattresses which adopts a unique design and is very suitable for cows’ living habits of lying in bed for resting and ruminating. Product Features: The outer surface is covered with small vine and easy to wash. In the middle, 3-7cm thick special –designed spongy layer (shown in sort of “Spongy Layer”) is very soft and comfortable. In order to avoid the bacterial growth in the spongy layer, a layer of strong waterproofing membrane is specially covered on the surface of spongy layer. Due to the unique design concept, the product receives great kindness of the farm managers. According to the long-term experimental statistics, the cow bedding rate of this type of mattresses reaches 95 percent, higher than that ordinary mattresses. As far as scientific calculation, the milk yield increases 6.2 percent after using this type of cow mattresses.
Qingdao Haiqin Rubber CO.,LTD / China -
Sell:cow rbber floor mat
Product specification (L*W*T): 60m longest, 2m widest, 8-17mm thick, up to the requirements of the client. Product appearance: tortoise shell pattern on the surface and groove at the bottom Product material: natural rubber, reclaimed rubber, SBR and mineral filling material Product application: corridors in milking parlor or workshop, entrance hall Product performance: The product has the features of high tenacity, ductile, anti-slip, anti-static, anti-fatigue, anti-epidemic, heat insulation, easy to wash and replace, free of smell, with good elasticity and long service life for 10 years.
Qingdao Haiqin Rubber CO.,LTD / China -
Sell:Used stainless steel horizontal storage tank with volume 5000 l.
Stock number: U2059-26 Used stainless steel horizontal storage tank with volume 5000 l. Tank has top located manway with lid. Tank is designed for work on pressure 0.04 bar at temperature range up to 150C. Mounted on two skids. Diameter: 1200 mm x 4100 mm length of straight side of wall.
Perry Machinery Poland / Poland
